Specifications

Using Hog® 3PC Software
40 Hog iPC Handbook
2. Select the Wings tab. The Hog 3PC application provides one port for each of the possible
playback bars.
3. To configure a wing to a playback bar, click on the box associated with the playback bar
and select the wing from the list of serial numbers that appears. Wholehog 3 Expansion
Wings will appear with their serial number followed by a display number.
Once properly configured, the wing status will change to display "connected" and the
beacon icon will become enabled. The Beacon button flashes the Wing's LEDs to identify
its connection port.
The Display button will toggle the graphical playback bar on or off.
Each playback bar can be displayed regardless of hardware
configuration. This can be useful when working offline.
MIDI and Linear Timecode
The Hog iPC console contains a SMPTE input as well as MIDI in/out/thru. MIDI and SMPTE are
both automatically configured with the Hog
iPC hardware. See the Wholehog 3 User Manual
for information on how to activate these features within the Wholehog
3 operating system. In
addition, the Hog iPC supports the use of the Wholehog 3 MIDI/Timecode Processor (IOP) for
additional timecode inputs and outputs. Refer to section 12.3 of the Wholehog 3 user manual
for configuration information.