Specifications

Using Hog® 3PC Software
Hog iPC Handbook 39
Note: Some widget serial numbers will appear with RED text. This
indicates that the USB DMX Widget is not compatible with Hog 3PC
and must be enabled. Please contact HES for upgrade information.
4. Click Apply or OK to confirm the selection. The widgets that have been connected should
now have their "Active" "DMX OK" and "TX Mode" indicators illuminated.
5. You can identify which widget is connected to the port by selecting the Beacon button to
the right of the port. The widget connected to that port will flash its indicator lights for a
few seconds.
USB Playback Wings
You can increase the number of physical Masters by connecting USB Playback Wings and/or
USB Expansion Wings to the console. Configuration is very similar to that of the USB DMX
Widgets.
Before you begin configuring connected playback wings, ensure that an USB Playback or USB
Expansion wing is connected to an USB port of the console. The "link" indicator on the wing
should be illuminated and it will blink every 2 seconds to indicate that it is functioning
correctly.
Use the following steps to configure the wings:
1. Select the Setup key on the Front Panel and then the Control Panel button on the
interface to open the Control Panel.