Product Overview

Airtec
Airtec
Airtec
www.airtecproducts.com
Revised 5/15/2011
CLARIFICATION OF MINI & MAXI LIME SURFACE MOUNTED PUMPS
ASP-MLS 115, 230, LG24 ASP-MAXLS 115, 230
MLS & MAXLS series kits consists of a
standard MINILIME OR MAXILIME pump assembly
which is packaged complete with SLIMDUCT lineset
cover system. SLIMDUCT
includes an elbow, matching
31” length of lineset cover and
ceiling plate. The SLIMDUCT
prole is considerably deeper
than the ML/SLIMLINE and
can accommodate a lineset of up to ½” x ¾” with 3/8”
insulation.Standard MLS kits come with a BEIGE/
IVORY SLIMDUCT color only and are fully compatible
in size and color with the SD-77 Series from
SLIMDUCT and with the CD-75 Series from LINEHIDE.
Extra lengths of lineset cover up to 78” and various
other ttings are available from Airtec if required.
ASP-MLF 115, 230 ASP-MAXLF 115, 230
MLF & MAXLF series kits consists of a
standard MINILIME OR MAXILIME pump assembly
which is packaged complete with a FORTRESS
lineset cover system.
FORTRESS includes an
elbow, matching 31” length of
lineset cover and ceiling plate.
FORTRESS prole is consid-
erably deeper than the MLS/
SLIMDUCT and was developed for 36,000 to 60,000
BTU/Hr. Minisplit installations. FORTRESS can ac-
commodate the larger lineset and thicker insulation
now required by some local codes.
Standard MLF kits come with WHITE FORTRESS
only and are fully compatible with the FORTRESS
LD-92 Series from AIRTEC. Extra lengths of lineset
cover up to 96” and various other ttings are available
from AIRTEC if required.
ASP-ML 115, 230, LG24
ML series kits consists of a
standard MINILIME pump assembly
which is packaged complete with
ASPEN SLIMLINE lineset cover
system. SLIMLINE includes an elbow,
matching 31” length of lineset cover
and ceiling plate. The SLIMLINE prole
is less than 2” high and specically
developed by
ASPEN to
present the least
intrusive prole
for the lineset
cover.
SLIMLINE can accommodate lineset
up to 3/8” x 5/8” with 3/8” insulation.
Standard ML kits come with a light
IVORY SLIMLINE color which matches
many evaporators.
NOTE: SLIMLINE is not compatible
with lineset covers from any other
manufacturer. The SLIMLINE provided
is sufcient to conceal the lineset
for most minisplit installations. Extra
lengths of duct or additional ttings are
NOT available.
A white conversion kit
(ASP-ML-WPAC) is available.
This kit consists of the same elbow,
matching 31” length of lineset cover
and ceiling plate as the SLIMLINE
IVORY, but in bright white which will
make the pump/duct assembly
compatible with any white
evaporator.
ASP-MLOEM 115, 230, LG24 ASP-MAXOEM 115, 230
230
MLOEM & MAXOEM series consists of a MINILIME or MAXILIME pump assembly
only, which is supplied complete with 6” of 5/8” intake hose and 5’ of ¼” discharge hose but
does not include the lineset cover system.
Included are a plastic mounting bracket, an inline lter and a 90° ell with a 5/8” barb tting on
one end and a ¾” MPT at the other end for connecting directly into the drain pan outlet. They
are intended for use in OEM applications or in situations where there are space restrictions or
where lineset covers are not required.
MINILIME
BTU/Hr: Up to 30,000 Max Head: 26 ft
MAXILIME
BTU/Hr: Up to 60,000 Max Head: 49 ft
ELBOW
DUCT
CEILING
PLATE
NOTE:
SURFACE MOUNTED
PUMPS ARE NOT
RECOMMENDED FOR
INSTALLATION IN A
BEDROOM OR OTHER
NOISE SENSITIVE AREA.
LIME installation overview:
Lineset enters the evaporator
from either side, turns 90º up
into the ceiling and is completely
concealed by lineset cover
(included in kit).
Typical nished installation