Use and Care Manual

Install next tile as shown.
Moving left to right, use overlap
notches to abut tiles, just as you would
in a backsplash installation.
Continue the process for remaining
tiles.
A table saw can also be used for
straight cuts.
Sanding tile edge.
Continue the process for the remaining
tiles.
Beginning from inside corner on right,
place the rst tile.
Beginning from inside corner on left,
place the rst tile.
Sanding tile edge.
Cut away the notch with a miter saw.
Straight cut edge with notch removed.
Cut away the notch with a miter saw.
A powered miter saw is recommended
for straight cuts.