Use and Care Manual

Method 1 - The adhesive on the back

side of the Aspect tiles is engineered to

be aggressive and pressure-sensitive.

Method 2 - Using high-quality

polyurethane construction adhesive.

Beginning from inside corner on right,

place the rst tile.

Beginning from inside corner on right,

place the rst tile.

PAGE 1
Method 1 - The adhesive on the back side of the Aspect tiles is engineered to be aggressive and pressure-sensitive. Method 2 - Using high-quality polyurethane construction adhesive. Beginning from inside corner on right, place the first tile. Beginning from inside corner on right, place the first tile.
PAGE 2
Cut away the notch with a miter saw. Cut away the notch with a miter saw. Straight cut edge with notch removed. Sanding tile edge. Beginning from inside corner on right, place the first tile. Install next tile as shown. Continue the process for the remaining tiles. Beginning from inside corner on left, place the first tile. Moving left to right, use overlap notches to abut tiles, just as you would in a backsplash installation. Continue the process for remaining tiles.