User`s manual
5
3. Product Installation
A. Hardware Installation
Cable Connections
Network Connector:
The RJ-45 connector allows connect the Ethernet cable.
Power Jack:
To connect the DC 12V power adapter.
Video In:
The BNC connector allows connect to the video signal of an
analog camera.
Video Out:
The BNC connector allows connect to the analog display to
output analog video for locally monitoring.
Audio In:
The RCA connector allows connect to a microphone or audio
source, the voice will be transferred to remote site via network.
Audio Out:
The RCA connector allows connect to an amplified speaker,
you can hear the voice of the remote site from the speaker.
Antenna Connector:
To connect the included wireless antenna.
I/O Connector:
The terminal blocks allow connect to a PTZ device, and I/O.
SD Card Slot:
Insert a SD card if you want to do the event recording.