User`s manual

52
Connects to an Exist LAN
If the video server will be used in a local network (LAN) and don’t allow to access via
Internet, please refer to the figure below for the connection.
 Connect the video servers to the Switch.
 Refer to Configuration  Network  Network page to configure the IP settings.
 Please make sure the IP address of Router, PC and video servers are in the same
subnet. Ex. 192.168.1.2 and 192.168.1.210 have the same subnet.
 Set Subnet Mask of Router, PC and video servers.
 Set Gateway of PC and video servers with the same IP address. Usually, the
Gateway is the IP address of router.
 Set the IP address of a valid DNS into video servers. An invalid DNS will cause the
domain name can’t be resolved and reached, such as email address.
For example, if the IP settings have been configured as the above figure, the video
servers can be linked with following addresses:
Client Video Server Link Address Remark
PC
Video Server 1 http://192.168.1.210
Video Server 2 http://192.168.1.211
PC
IP
Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Gateway:
192.168.1.254
Video Server 1
IP
Address: 192.168.1.210
Subnet Mask: 255.255.255.0
Gateway:
192.168.1.254
Http
Port: 80
Video Server 2
IP
Address: 192.168.1.211
Subnet Mask: 255.255.255.0
Gateway:
192.168.1.254
Http
Port: 80
Switch
Router or IP Sharing
IP
Address: 192.168.1.254
Subnet Ma
sk: 255.255.255.0
Intranet (LAN)