User`s manual

 Save to SD Card: When the Digital Input is triggered, record the video or

snapshot into to SD card.

 Out1 / 2 / 3 / 4: When the Digital Input is triggered, activate the Relay Output

1, 2, 3 or 4.

E-Mail Subject: The subject of the E-mail will be sent.

Detection Interval: The interval time between multiple detections. For example, if the

time set to 10 seconds, when the Digital Input is triggered at time 10H:05M:10S, the

next trigger will be accepted after 10H:05M:20S. The triggers between 10H:05M:10S

to 10H:05M:19S will not be accepted.

Digital Output Setting

This section is for setup the parameters of Relay Output.

Note: The following settings are available when manually turn on the Relay Out on

Live-View page.

Output Switch Type: Select the type of the Digital Output switch. [On/Off Switch]

will be triggered to On or Off constantly. [Time Switch] will be triggered to “On” and

lasting for a period time, and then “Off” automatically.

Output Interval: If the Digital Output switch is a “Time Switch”, the lasting time of the

“On” period can be set here.

After set up, click [Apply] to save the settings.