User`s manual

Authentication: There are “Open System” and “Shared Keys”, it is based on different

encryptions. This has to be the same as the Router’s setting.

Encryption: There are 64 bits and 128 bits. This is based on Key Type based on the

Router’s setting.

Key Type: There are HEX and ASCII. When selecting HEX, the user only can input

0~9 characters and use A, B, C, D, E, and F. When selecting ASCII, the user can input

any character (case [upper cases/ lower cases] sensitive).

Key 1~4: Based on Key Type to input characters.

WPA-PSK Setting

The Wireless model supports “WPA-PSK” and “WPA2-PSK” security encryption. The

settings must be same as the Router’s setting. Consult your network administrator to

set the parameters.

Encryption: There are “TKIP” and “AES”.

Pre-Shared Key: Allow any characters (case [upper cases/ lower cases] sensitive).

After set up, click [Apply] to save the settings.