User`s manual

27
Channel: Select the channel from the pull-down list to configure the settings.
Resolution: Select the resolution from the pull-down list.
 D1 – 720X480 (NTSC), 720X576 (PAL)
 4CIF – 704X480 (NTSC), 704X576 (PAL)
 CIF – 352X240 (NTSC), 352X288 (PAL)
 QCIF – 176X144 (NTSC), 176X144 (PAL)
Frame Rate Per Second: The video refreshing rate per second. Select the frame rate
from the pull-down list.
 Up to 12FPS (NTSC) / 10FPS (PAL) can be selected.
Video Compression Format: Choose H.264 or JPEG format to compress and output
the video stream.
H.264: The video stream will be compressed in H.264 format. Choose CBR
(Constant Bit Rate) or VBR (Variable Bit Rate) in Bitrate Control Mode.
 CBR: Set the Video Bitrate from 64Kbps ~ 2Mbps depend on the upload
bandwidth of network. The data size of video stream will be limited under
the selected bit rate.
 VBR: Set the Video Quantitative from 1 ~ 5, the higher value will get
better video quality. The data size of video stream is no limitation, if the
upload bandwidth of network is lower than the data size, the video will be
displayed slowly.
 GOP Size: Set the GOP (Group of Picture) size. If you don’t know what
value should be set, please set it to “1XFPS”.
JPEG: The video stream will be compressed in MJPEG format.
 Quality: 5 levels for select. The higher quality will get bigger file size.
RTSP Path: Assign a name to identify this video stream. When view the video stream
with RTSP connection, the URL should be “rtsp://<Public IP of this device>:<RTSP
port>/<RTSP path>”.
After set up, click [Apply] to save the settings of concurrent channel.
Note: Before change the channel for configure, you must click [Apply] button to save
the configuration of the concurrent channel.