User`s manual



Screen and Channel Buttons :

Full Screen : Click this button or double-click the video, the video will

change to full screen mode.

Double-click the video again, it will back to normal mode.

Record : Click this button to record the video into the local PC. It will ask

you where to save the video. To stop recording, click this button again.

The saved video format is AVI. The recorded file can be played by

Microsoft Media Player. Note, H.264 decoder must be installed to play the

recorded file. You can install “FFdshow” from the included CD for the

decoder.

Quad : Display all channels simultaneously.

CH1~CH4 : Select each channel to display and control.



Function Buttons : Click these buttons will perform the following functions.

Snapshot : Click this button to take snapshot of the video. The image will be

displayed in a pop-up window, right-click on the image and click [Save AS…]

in the context window, select a location to save the image.

Chatting : The video server supports 2-

way audio. Click this button, then you

can use microphone which connected to the PC to talk to the video server

side.

Relay Out (ON/OFF Switch) : Click the button to manually turn on / off the

Relay via the built-in Digital Out.

Relay Out (Time Switch) : Click the button to manually turn on the Relay via

the built-in Digital Out, after the interval time is passed, the Relay will be

turned off automatically. The interval time can be set up in Configuration 

Event Handling  I/O.