User`s manual

15

Online Visitor : Shows how many users connect to this device.

PTZ Model : If a PTZ device is connected to the video server, click this button to
setup the model, camera ID and baudrate of the PTZ device. Click this button again
will hide the setup options.

P/T/Z Control Panel : If a PTZ device is connected to the video server, this control
panel will be displayed automatically.
Pan/Tilt
Control
Pan / Tilt the camera: Click the direction buttons.
Move camera back to
the home position:
Click button.
Speed
Adjust the speed of the
camera movement:
Select the speed from the pull-down list, higher
value is faster.
Zoom
Focus
Iris
Adjust the Zoom, Focus
and Iris:
Click or button to adjust the
camera.
Auto Pan
Automatic pan the
camera from right to left
and left to right:
Click button beside “Auto Pan”.
Stop “Auto Pan”:
Click button beside “Auto Pan”.
Patrol
Automatic move the
camera to all preset
points sequentially:
Click button beside “Patrol”.
Stop “Patrol”:
Click button beside “Patrol”.
Preset
Point
Set / Change Preset
Point:
Select the preset point from the pull-down list,
move the camera to the position as your wish,
input a name in the “Name” box, and then click
button.
Go to Preset Point:
Select the preset point from the pull-down list
and the camera will go to the position
Remove Preset Point:
Select the preset point from the pull-down list
and then click button.