2 Mega-Pixel H.264 CMOS Network Camera CAM616M / CAM616M-PoE User’s Manual Date: 7/20/2012 Firmware Version: V1.0.
Content Content ....................................................................................................................................... 1 1. Preface ................................................................................................................................. 3 2. Product Specifications ....................................................................................................... 3 3. Product Installation ......................................................
Connects to PC Directly ...................................................................................................... 51 Connects to an Exist LAN ................................................................................................... 52 B. Internet Only .................................................................................................................. 53 Connects to ADSL with Fixed Public IP Address .................................................................
1. Preface This camera is a professional 2 Mega-Pixel CMOS network camera which builds in web server. User views real-time video via IE browser. It supports H.264, JPEG and MPEG4 (3GPP Only) video compression which provides smooth and high quality video. The PoE model built-in support for Power over Ethernet allows the camera to receive both data and power over a single Ethernet cable. This camera is an easy-to-use IP camera which is designed for security application. 2.
Use PoE: PoE Injector (IEEE 802.3af) Or, use Power Adaptor: DC 12V, 1A Power Consumption Max. 6 Watt Dimensions W69 x H60 x D151 mm Network Ethernet 10/ 100 Base-T Network Protocol HTTP, TCP/IP, RTP/RTSP, 3GPP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP, UPnP System Video Resolution 1600x1200, 1280x1024, 1280x960, 1280x720 800x592, 640x480, 320x240, 176x144 Compression Format H.
3. Product Installation A. Hardware Installation Cable Connections Network Connector: The RJ-45 connector allows connect the Ethernet cable. Power Jack: To connect the DC 12V power adapter. Audio Out: The RCA connector allows connect to an amplified speaker, you can hear the voice of the remote site from the speaker. Video Out: The BNC connector allows connect to the analog display to output analog video for locally monitoring. Digital I/O: Digital In and Relay Out. 1.
the power from the PoE injector or PoE switch. PoE (Power over Ethernet) is a technology that integrates power into a standard LAN infrastructure. It enables power to be provided to the network device, such as an IP phone or a network camera, using the same cable as that used for network connection. It eliminates the need for power outlets at the camera locations. Please follow the below figure for the connection.
Digital Input (Alarm Input) GND (Ground): Initial status is LOW. Alarm: Max. 50mA, 12VDC. Door/Window Contacts Relay output COM: Common pin. N.O. (Normally Open): Max. 1A / 24VDC or 0.5A / 125VAC. N.C. (Normally Close): Max. 1A / 24VDC or 0.5A / 125VAC.
B. Monitor Setting 1. Right-Click on the desktop. Select “Properties” 2. Change color quality to “Highest (32bit)”.
C. IP Assignment Always consult your network administrator before assigning an IP address to your camera in order to avoid using a previously assigned IP address. MAC Address: Each network camera has a unique Ethernet address (MAC address) shown on the sticker of the device. One final note, although the IP Search is able to find and configure any network device on the LAN except those that are behind a router, it is a good idea to set the host PC to the same subnet.
2. IP Search searches all the network devices which connect to the intranet and lists on the window. Click [Search] button to search again. 3. From the list, click and select the device with the MAC Address that corresponds to the device that is to be configured. 4. The network configuration of the selected device will show on the bottom, filling in the Device Name, IP Address, Subnet Mask, Gateway and the others. 5. Click [Modify] button to save the settings into the device. 6.
4. Live Video Start the IE browser, type the IP address of the network camera in the address field: http:// If the “HTTP Port” has been changed from “80”, type the URL as: http://: After link to the camera, it will show a dialogue box. Key-in the user name and password to log-in and open the web page of camera. The default user name and password are “admin” and “admin”.
1 2 3 4 5 When popup the following dialogue box, click [Yes].
The web page of the device shows as following. If you are using IE 8.0 or above, please click “Compatibility View” icon to make this web page works properly: ⑤ ① ② ③ ④ ⑥ Streaming : Select the streaming 1 or 2 from the pull-down list to display. Language : Change the display language temporarily. Note: The display language is changed temporarily for current connection, and it doesn’t change the default language. To change the default language, please go to Configuration System Information page.
Online Visitor : Shows how many users connect to this network camera. Function Buttons : Click these buttons will perform the following functions. Original Size : Click this button to display the original size of video. Shrink View : Click this button to shrink the video to fit the window for view. Full Screen : Click this button or double-click the video, the video will change to full screen mode. Press [Esc] key or double-click the video again, it will back to normal mode.
Relay Out (ON/OFF Switch) : Click the button to manually turn on / off the Relay via the built-in Digital Out. Relay Out (Time Switch) : Click the button to manually turn on the Relay via the built-in Digital Out, after the interval time is passed, the Relay will be turned off automatically. The interval time can be set up in Configuration Event Handling I/O.
5. Configuration Click [Configuration] button to get into the configuration page. Click button to back to the Live-View page. A. System System Information Set up the camera name, select language, and set up the camera time.
Server Information MAC Address: The MAC address of the Ethernet network card in the device. Server Name: You can type a name into this field to identify this device. Show on Status Bar: Determine whether show the server name on the Status Bar. Default Language: Select the default language for the user interface. OSD Setting Time Stamp: Enable this option will display the date and time on the video. Position: Select the display position of Time stamp.
Time Setting Date Format: Select the format to display the date. Time Zone: Select the GMT to match your time zone. Enable Daylight Saving: If using “Daylight Saving”, enable this option and select the start and end time. Synchronize with NTP Server: Select this option and type the IP address of a NTP (Network Time Protocol) server, this device will synchronize the time with the NTP server via network. NTP Server: Type the IP address or URL of the NTP server.
The date and time remain the same: Keep the current date and time without change. After set up, click [Apply] to save the settings.
User Management You can add, remove and manage the users in this page. This device supports 3 user groups: Administrator: The administrator can view, operate and configure all functions and settings of this device. Guest: The users in Guest group can only view the live video in Live-View page. Anonymous: The anonymous user can only view the live video in Live-View page. The privilege is same as Guest group.
Edit: To change the username and password, click [Edit] and modify the administrator or user in the pop-up window. Remove: To remove the user, click [Remove].
System Upgrade This page allows user to upgrade firmware, restart device and restore the factory default settings. System Upgrade Firmware Upgrade The firmware can be upgraded online. To update the firmware, click [Browse…] to select the new firmware file, and then click [Upgrade] to the procedure. Reboot System To restart the device, click [Reboot] and then click [Yes] on the prompted window. Factory Default To load the factory defaults, click [Default] and then click [Yes] on the prompted window.
System Logs System Logs System Status Logs Click the [View] button on the right side to list the logs of system status. Motion Trigger Logs Click the [View] button on the right side to list the logs of motion detection. Digital-In Trigger Logs Click the [View] button on the right side to list the logs of digital input detection. All Logs Click the [View] button on the right side to list all logs.
B. Video/Audio Setting Video Format This device supports H.264/MJPEG and MPEG4 (only for 3GPP streaming) Triple Mode and Triple Streaming, set the video parameters in this page.
Original Video Original Video: Select the Original Video from the pull-down list.
Video System: Select NTSC-60Hz or PAL-50Hz to match your local video system. TV Output: Select the video system of the analog video output signal. Select Auto will follow the selection in “Video System”, or select NTSC or PAL manually. Streaming 1 and 2 Output Setting Basic / Advanced Mode: Select the mode to configure the parameters. Advanced mode provides more detail parameters for setting. Resolution: Select the resolution from the pull-down list.
3GPP Streaming Output Setting After enable the 3GPP streaming, it will enable this device to send out the video in 3GPP format, and you can view the live video on the 3G mobile phone. Since the bandwidth of 3G is not fast usually, the 3GPP streaming will be set to the following configuration: Resolution – Fixed to 176x144. Frame Rate –Fixed to 5FPS. Video Format – Fixed to MPEG4. Audio Format – Fixed to AMR.
After set up, click [Apply] to save the settings.
Image Setting Image Setting Privacy Mask For the security purpose, there are 3 areas can be setup for privacy masks, the masked areas will not be shown in Live-View and recorded file. To set up or clear the privacy mask, click [Draw/Clear Area] button, and then use mouse to drag the area on the video. After the configuration, click [Save Area Settings] button to save the settings.
video. Automatic Gain Control: Adjust this function according to the environment. Backlight Compensation: This device supports “Back Light Compensation”, enable/disable this function by selecting ON or OFF. AWB Gain - Red: Adjust the gain level of red color for the automatic white balance. AWB Gain - Blue: Adjust the gain level of blue color for the automatic white balance. Frame Rate at Night: This function can be set at different Frame rate to increase night illumination.
Audio Setting This device supports 2-way audio. Audio from Device to Local PC For this device to local PC, select [Enable] and then click [Apply] to start this function. If set to [Disable], the [Voice] icon on Live View page is not workable. Audio Setting Audio from Local PC to This Device For local PC to this device, click [Chatting] icon on the Live View page.
C.
IP Assignment DHCP: If this device behinds a router and the router provides DHCP service, using DHCP, this device will get all network parameters from the router automatically. Static: Assign IP address, subnet mask, gateway, and DNS manually. Port Assignment Set the port if necessary. If this device will be connected via Internet, configure the NAT (Network Address Translation) in router to match the port assignment. HTTP Port: Set the port for HTTP connection.
RTSP Server Setting RTSP Server: The video stream can be direct retrieve via RTSP connection, you can close this function by disable this option. RTSP Port: Set the port for transfer the video and audio. The default is “554”, change the port if you want to use router’s NAT (Network Address Translation) to make this device can be linked from Internet. RTP Port: Set the port range of RTP port. In RTSP mode, you may use TCP and UDP for connecting. TCP connection uses RTSP Port.
keeping the RTSP connection, this device will terminate the RTSP connection. If select “Disable”, this device will always keep the RTSP connection. If the “Time-out” error happens on NVC side, please disable this function. After set up, click [Apply] to save the settings.
Mail / FTP / Samba Setting To send out the event video to E-mail, FTP or Samba network storage, please set up the configuration first.
Mail Setting Login Method: This device provides 2 kinds of mail settings. “Anonymous” for the mail server which doesn’t need login with user name and password. “Account” for the mail server which needs login with user name and password. Send Mail Server: The IP address or URL of the send-mail server. User Name / Password: The user name and password of the sender to login mail server and send the mail. Sender’s Mail: The sender’s mail address. Receiver’s Mail: The receiver’s mail address.
FTP Port: The port of the FTP service. Default is 21. Store Path: The path to save the sent video file. FTP Mode: Select “PORT” or “PASV to fit the FTP server. “PORT” is for sending file to an Active FTP server; “PASV” is for sending file to a Passive FTP server. Auto Create Folder by Date: If select “Yes”, a folder will be created under the “Store Path” and named with the date, and then the video file will be saved in this folder.
PPPoE Setting If this device connects to an ADSL modem directly and want to use PPPoE connection, set the parameters in this page. PPPoE Setting PPPoE Connection Select [Enable] to use PPPoE. Type in user name and password for the ADSL connection. Send E-mail After Dialed If select [Enable], when connect to the Internet via PPPoE, this device will send a mail with the Subject to a specific mail account, this mail contains the public IP address of the ADSL connection.
DDNS Setting This device supports DDNS, set the parameters in this page. DDNS Setting DDNS Setting There are several DDNS providers can be selected. Select the provider from the pull-down list, input Hostname, User name, Password and the Schedule Update time, and then click [Apply] to connect to the DDNS provider. Status This field will display the message to indicate the status of DDNS service. Updating: Information update. Idle: Stop service. http://..
Update Failed, check your internet connection: Network connection failed. Update Failed, please check the account information with you provider: The input hostname, username or password may be wrong.
D. Event Handling Event Setting This device supports multiple event settings. Event This device supports 2 kinds of event detections: Motion Detection. Digital Input Detection.
Motion Detection This device allows 3 areas for detect motion. When motion detection is triggered, it can send the video or snapshot to specific mail address; transmit the video or snapshot to remote FTP server or Samba network storage; trigger the digital out. Set the Area: To set up or clear the motion area, click [Draw/Clear Area] button on “Set Area” row, and then use mouse to drag the area on the video.
FTP: When the motion detection is triggered in this area, send the recorded video or snapshot to the specific FTP site. Save to Samba: When the motion detection is triggered in this area, send the recorded video or snapshot to the Samba network storage. To set the mail account FTP site and Samba network storage, please refer to Configuration Network Setting Mail&FTP page. Out1: When the motion detection is triggered in this area, turn on the Digital Output 1.
Motion! The moving object smaller than the 50% of the The moving object larger than the 50% of the motion motion area, it will not be detected! area, it will be detected, and the motion is triggered! To detect the smaller moving object, use 3 motion areas to replace a large motion area, refer the figure below: Motion! The moving object will be detected when it is in any of the 3 motion areas, and the motion is triggered! Record File Setting There are 3 methods to record the event video and send out v
Snapshot (Single): This option is available when the “Video Format” of streaming 1 is set as “JPEG” in Video Format page. When an event (Motion Detection or Digital Input Detection) is triggered, this device will take a snapshot with JPG format. Pre and Post Record Time Setting Configure the record time for the event recording file.
I/O Setting This device provides Digital Input and Digital Output. When the Digital Input is triggered, it can send the video or snapshot to specific mail address; transmit the video or snapshot to remote FTP server or Samba network storage; trigger the digital out. I/O Setting Digital Input Setting Input 1 Sensor Type: Select the type of the sensor which connected to the Digital Input. [N.O] means “Normally Opened”, this type of sensor will be triggered when it is closed. [N.
The interval time between multiple detections. For example, if the time set to 10 seconds, when the Digital Input is triggered at time 10H:05M:10S, the next trigger will be accepted after 10H:05M:20S. The triggers between 10H:05M:10S to 10H:05M:19S will not be accepted. If the “Out” is selected for the action, the Interval means “Digital Output On” period.
Schedule This function provides the schedule for the following: Send Snapshot with the Scheduled Time: automatic send a snapshot to the E-mail address, FTP server or Samba network storage. The interval time can be set.
light-grey means the time is unselected. Select / Unselect Specific Time: Click the square of the time table to select or unselect the specific time. The square in green means the time is selected; the square in light-grey means the time is unselected. Send Snapshot with Scheduled Time Enable / Disable: To enable or disable the schedule function. Snapshot: Select the method to send out the snapshot.
6. Network Configuration A. Intranet Only Connects to PC Directly If you want to connect the camera to PC directly for the very first time setup, please refer to the figure below for the connection. Ethernet Cable Camera This device supports Auto-MDI/MDIX, PC IP Address: 192.168.1.200 you can use a straight or cross-over IP Address: 192.168.1.2 Subnet Mask: 255.255.255.0 cable to connect these two devices. Subnet Mask: 255.255.255.
Connects to an Exist LAN If the camera will be used in a local network (LAN) and don’t allow to access via Internet, please refer to the figure below for the connection. Intranet (LAN) Camera 1 Switch IP Address: 192.168.1.200 Router or IP Sharing Subnet Mask: 255.255.255.0 IP Address: 192.168.1.254 Gateway: 192.168.1.254 Subnet Mask: 255.255.255.0 Http Port: 80 RTSP Port: 554 Camera 2 PC IP Address: 192.168.1.201 IP Address: 192.168.1.2 Subnet Mask: 255.255.255.0 Subnet Mask: 255.255.255.
B. Internet Only Connects to ADSL with Fixed Public IP Address If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is fixed, please refer to the figure below for the connection. Internet (WAN) Camera PC 3G Mobile Phone IP Address: 60.220.20.250 Subnet Mask: 255.255.255.0 Gateway: 60.220.20.254 Http Port: 80 RTSP Port: 554 ADSL Connect the camera to the ADSL modem.
Connects to ADSL with Floating Public IP Address (PPPoE) If the camera connects to Internet with an ADSL modem and the public IP address of ADSL is variable, the camera can use PPPoE function for the connection. Internet (WAN) Camera PC 3G Mobile Phone Configure the PPPoE Setting ADSL Connect the camera to the ADSL modem. Refer to Configuration Network PPPoE page to configure the PPPoE settings. The camera will automatic dial-up and get the public IP address from ISP.
After enable the DDNS, assume the registered URL is “test.dyndns.org”, now the camera can be linked with following URLs: Client PC Link Address Remark http://test.dyndns.org With audio: 3G Mobile rtsp://test.dyndns.org/3g Phone Without audio: rtsp://test.dyndns.
C. Intranet + Internet Connects to Internet with Fixed Public IP Address If the camera will be added into a local network (LAN), and will be accessed via both Intranet and Internet, please refer to the figure below for the connection. Intranet (LAN) Internet (WAN) PC1 PC2 3G Mobile Phone IP Address: 192.168.1.2 Camera 1 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.254 IP Address: 192.168.1.200 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.
Set Subnet Mask of Router, PC and cameras. Set Gateway of PC and cameras with the same IP address. The Gateway is the IP address of router. Set the IP address of a valid DNS into cameras. An invalid DNS will cause the domain name can’t be resolved and reached, such as email address. Configure the cameras with different RTSP port. Ex. assign camera1 with port 554, and assign camera2 with port 555.
Camera 2 With audio: rtsp://60.220.20.250:555/3g Without audio: rtsp://60.220.20.250:555/3gx Connects to Internet with Floating Public IP Address If the public IP address of ADSL connection is variable, you can enable DDNS function to get a fixed URL to instead of the IP address. Note: only one device can enable the DDNS function in the local network (LAN), multiple devices use DDNS will update to the DDNS provider too frequently, and the DDNS provider will block your URL.
7. Factory Default To recover the default password and other settings, please follow the steps: 1. Power off this device. 2. Use a needle about 5cm long insert into the "Factory Default Hole" and push the button in the hole, keeping push it and don't release. Factory Default Hole 3. Power on the device. Don’t release the button during the system booting. 4. It will take around 30 seconds to boot the device. 5. Release the button when the device finishes proceed. 6.
