User`s guide

Asoka® User’s Guide
PlugLink® 9850 IP Camera PL9850-CMS
27
Chapter 8
Using the PlugLink 9850 IP Camera’s Web-based Utility
You can use the PlugLink 9850 IP Camera’s web-based utility to access and alter its
settings. This chapter will describe each webpage in the Utility and its features. The
Utility can be accessed via the web browser of a computer connected to the camera.
Please make sure your camera is configured and powered up. This section will
describe some of the basic functions of the Web GUI. Please refer to the Glossary for
more advanced functions.
You may connect to your camera directly to your PC by using an Ethernet cable
(provided) or through your power line network.
How to Access the Web-based Utility
To access the web-based utility, follow these instructions:
1. Launch Internet Explorer
2. Enter the Camera’s IP Address field. (The default IP address is 192.168.8.100.)
3. Press Enter.
4. A popup screen will appear. Enter your user name and password and click OK.
(The default username and password is admin.)
Figure 8-1: Login screen
The System Details page of the web-based utility will appear. The Operation Bar is on
the left and the System Details section is on the right.