User's Manual

91
Calibration: Page 10 (keyboard)
Control button Function Range Description
2 Calibrate Ribbon (access) (see below)
3 Calibrate Wheels (access) Full-range motion of each wheel
Calibrate Ribbon
Keyboard model only: Press Control button 2
to access the calibration page and follow the
instructions on Left display. Press and hold
the ribbon above each C on the keyboard,
including the lowest and highest keys. After
each point has been calibrated the page will
exit automatically.
Calibrate Wheels
Keyboard model only: Press Control button 3
to access the calibration page and follow the
instructions on Left display. Move each wheel
slowly through its entire range, then press
[EXIT].
System: Page 10 (desktop) / System:Page11(keyboard)
Control button Function Description Range
1 Self Test (action) Press the button and the Hydrasynth will run a
series of self-tests.
2 Factory
Reset
(action) Resets all parameters in System Setup to their
default values. This does not erase the patch
banks.
OS: Page 11 (desktop) / OS:Page12(keyboard)
There’s only one item on this page: the OS version. Please include that in any communications
you might have with our Technical Support department. And always install the latest rmware
in your Hydrasynth so you can take advantage of new features as they are added!