User's Manual

86
Keys / Pads: Page 3
Control knob Function Settings Description
1 Velocity On, O Toggle velocity sensitivity
2 Velocity Curve Very Soft, Soft, Medium,
Hard, Very Hard
Select velocity response
3 Aftertouch Delay 0-400 ms (see description)
4 Aftertouch Fade 0-400 ms (see description)
5 Aftertouch On, O Toggle aftertouch sensitivity [1]
6 Aftertouch Curve Softer through Harder
(6 settings)
Select Aftertouch response
7 Aftertouch Oset - 4 to + 4 (see description)
8 Aftertouch
Release
0-400 ms (see description)
[1] This will also disable or enable polyphonic aftertouch.
Velocity settings
The velocity-sensitivity of the keyboard and
pads can be disabled by setting Velocity to
O. The Velocity Curve setting determines the
amount of force required to reach maximum
velocity values.
Aftertouch settings
• Aftertouch Delay: the time that transpires
between note on and the onset of
aftertouch.
• Aftertouch Fade: the time it takes to ramp
aftertouch to its current value from 0.
• Aftertouch Curve: determines the amount
of force required to reach maximum
aftertouch values.
• Aftertouch Oset: reduces the dynamic
range of the aftertouch. Positive values set
a higher minimum point, so it takes more
pressure to start the aftertouch. Negative
values set a lower maximum point, so it
takes less pressure to reach the maximum
aftertouch value.
• Aftertouch Release: more like a
compressor than an envelope, this applies
to all upwards movements. This can help
avoid unwanted modulation “wobble”
while pressure is applied, and can sustain
even after note o.
MIDI: Page 4
Control with... Function Settings Description
Knob 1 Clock Sync Internal, USB,
MIDI In, Auto
Clock source for Arp, LFOs, Envelopes, Delay FX
(see below)
Knob 2 Local On, O Disconnect keys, pads from internal engine
Knob 3 MIDI TX 1-16 Set MIDI transmission channel
Knob 4 MIDI RX Omni, 1-16 Set MIDI receive channel
Knob 5 Sus pedal +, -, Auto Set polarity of sustain pedal or detect on
power-up
Knob 6 Exp pedal +, - Set polarity of expression pedal
Button 7 Exp pedal set (access) Calibrate expression pedal
Knob 8 Exp pedal
curve
Log, Lin,
Sigmoid, Exp
Select response curve for expression pedal