User's Manual

58
Compressor
Control knob Parameter Range Description
2 Sidechain O, BPM Duck, Tap,
Mod In 1, Mod In 2
Selects sidechain source:
Arpeggiator clock, Tap Tempo button,
CV Mod Input 1 or CV Mod Input 2
3 [Ratio] 1.0 :1 to 20.0 :1 Controls compressor strength above
threshold
4 [Threshold] -64.0 to 0.0 dB Controls level at which compression
begins
5 Attack 1-400 ms Time until maximum compression
6 Release 5-560 ms Time to zero compression if signal is
below threshold
7 Output 0-512 Gain compensation
8 [Dry/Wet] 0.0-100.0% Blends unaected and aected signals
Delay Types
Hydrasynth oers 5 delay types, each with distinct characteristics:
• Basic Mono combines the stereo input signal and produces a mono delay.
• Basic Stereo preserves the stereo positioning of the input signal.
• Pan Delay alternates between the right and left input signals.
• LRC Delay outputs the left input, then the right input, then both, and repeats that pattern.
• Reverse takes whatever comes in during the delay period and plays it backward.
Delay Parameters
All of the delays have identical parameters, so we’ll describe them once.
Control knob Parameter Range Description
2 [Time] BPM = O: 1 ms to 3.00
seconds
BPM = On: 0, 1/64T to
1/1 Dot
Delay period
3 [Feedback] 0.0-128.0 Fade-out time for delay
4 [Wet Tone] -/+ 64.0 Filter control for Wet signal:
-64.0 to -0.1: Low pass lter
0.0: No ltering
0.1 ~ 64.0: High pass lter
6 BPM sync O, On Toggles delay sync
7 [Feed Tone] 0.0-128.0 Feedback high-frequency decay time
8 [Dry/Wet] 0.0-100.0% Blends uneected and eected signals