User's Manual
Table Of Contents
- Important Safety Instructions
- Welcome to Hydrasynth!
- Quick Start Guide
- Overview
- Hydrasynth Desktop
- Understanding the Modules
- The Oscillator Group
- The Mixer Module
- The Filters and their Controls
- The Amp Module
- The Envelopes
- The LFOs
- The Effects
- The Voice Module
- Ribbon Controller (keyboard only)
- The Arpeggiator Section
- Mastering the Macros
- The Mod Matrix
- The CV / Gate Section
- Patch Management
- The System Setup Pages
- Control Combinations
- Scales
- Hydrasynth Specifications
- Declaration of Conformity
57
Lo-Fi
Control knob Parameter Range Description
2 Preset 1-2 Selects preset
3 [Cuto] 160-20,000 Hz Filter cuto frequency
4 [Resonance] 1.0-12.0 Filter resonance
5 Filter Type Thru, PWBass, Radio,
Tele, Clean, Low
Selects lter model
6 Output - 6 / + 36 dB Gain compensation control
7 Sampling 44,100-2,756 Hz Sets downsampling rate
8 [Dry/Wet] 0.0-100.0% Blends unaected and aected
signals
Tremolo
Control knob Parameter Range Description
2 Preset 1-3 Selects preset template
3 [Rate] 0.02-10.0 Hz Controls the tremolo rate
4 [Depth] 0.0-128.0 Controls the tremolo depth
5 LFO shape Sine, Square Selects tremolo waveshape
6 Phase +/- 180° Phase relationship of left / right
LFOs
7 Pitch Mod 0-127 Controls vibrato depth
8 [Dry/Wet] 0.0-100.0% Blends unaected and aected
signals
EQ
Control knob Parameter Range Description
2 Preset Flat, LowBoost, Bass Cut,
High Cut, Smile, Lo-Fi,
Warm
Selects preset template
3 [LowGain] - 36.0 / + 24.0 dB Controls low frequency cut/boost
amount
4 [HighGain] - 36.0 / + 24.0 dB Controls high frequency cut/boost
amount
5 MidGain - 36 / + 24 dB Controls mid frequency cut/boost
amount
6 Xover Lo 32-2,000 Hz Sets crossover point from low to
mid range
7 Xover Hi 512-16,000 Hz Sets crossover point from mid to
high range
8 [Dry/Wet] 0.0-100.0% Blends unaected and aected
signals