Specifications

Comfort Reference Value – 5th Generation of STÖBER Inverters STÖBER
ANTRIEBSTECHNIK
11. Used Parameters
KSW-84
A.. Inverter
Par. Description Fieldbus-
address
A110.2
Global
r=1, w=1
USS PZD Mapping Rx 3. mapped Parameter: Address of the parameter which is imaged
third from the contents of the process data telegram (receiving direction as seen by the inverter).
NOTE
The parameter is only visible when a USS device controller is selected in the device configuration
or the appropriate blocks were used with the option for free, graphic programming.
Fieldbus: 1LSB=1; Type: U32; raw value:USS-Adr; USS-Adr: 01 1B 80 02 hex
206Eh 2h
A110.3
Global
r=1, w=1
USS PZD Mapping Rx 4. mapped Parameter: Address of the parameter which is imaged
fourth from the contents of the process data telegram (receiving direction as seen by the inverter).
NOTE
The parameter is only visible when a USS device controller is selected in the device configuration
or the appropriate blocks were used with the option for free, graphic programming.
Fieldbus: 1LSB=1; Type: U32; raw value:USS-Adr; USS-Adr: 01 1B 80 03 hex
206Eh 3h
A110.4
Global
r=1, w=1
USS PZD Mapping Rx 5. mapped Parameter: Address of the parameter which is imaged
fifth from the contents of the process data telegram (receiving direction as seen by the inverter).
NOTE
The parameter is only visible when a USS device controller is selected in the device configuration
or the appropriate blocks were used with the option for free, graphic programming.
Fieldbus: 1LSB=1; Type: U32; raw value:USS-Adr; USS-Adr: 01 1B 80 04 hex
206Eh 4h
A110.5
Global
r=1, w=1
USS PZD Mapping Rx 6. mapped Parameter: Address of the parameter which is imaged
sixth from the contents of the process data telegram (receiving direction as seen by the inverter).
NOTE
The parameter is only visible when a USS device controller is selected in the device configuration
or the appropriate blocks were used with the option for free, graphic programming.
Fieldbus: 1LSB=1; Type: U32; raw value:USS-Adr; USS-Adr: 01 1B 80 05 hex
206Eh 5h
A113
Global
read (1)
USS PZD Rx Len: Indicator parameter which shows the length in bytes of the expected process
data telegram with reference values of USS master for the current parameterization.
NOTE
The parameter is only visible when a USS device controller is selected in the device configuration
or the appropriate blocks were used with the option for free, graphic programming.
Value range: 0 ... 0 ... 255
Fieldbus: 1LSB=1; Type: U8; USS-Adr: 01 1C 40 00 hex
2071h 0h
A114.0
Global
r=1, w=1
USS PZD Mapping Tx 1. mapped Parameter: Address of the parameter which is imaged
first in the contents of the process data telegram (sending direction as seen by the inverter).
NOTE
The parameter is only visible when a USS device controller is selected in the device configuration
or the appropriate blocks were used with the option for free, graphic programming.
Value range: A00 ... E200 ... A.Gxxx.yyyy (Parameter number in plain text)
Fieldbus: 1LSB=1; Type: U32; raw value:USS-Adr; USS-Adr: 01 1C 80 00 hex
2072h 0h
A114.1
Global
r=1, w=1
USS PZD Mapping Tx 2. mapped Parameter: Address of the parameter which is imaged
second in the contents of the process data telegram (sending direction as seen by the inverter).
NOTE
The parameter is only visible when a USS device controller is selected in the device configuration
or the appropriate blocks were used with the option for free, graphic programming.
Value range: A00 ... E100 ... A.Gxxx.yyyy (Parameter number in plain text)
Fieldbus: 1LSB=1; Type: U32; raw value:USS-Adr; USS-Adr: 01 1C 80 01 hex
2072h 1h