Specifications
Table Of Contents
- Cover Sheet
- Table of Contents
- Notes on Safety
- Introduction
- Selecting the Type of Reference Value
- Representing the Reference Values in User Units
- Combining the Reference Values
- Available Reference Values
- Additional Functions
- Parameterizing the Speed and Torque Limits
- Additional Functions
- Fieldbus
- Used Parameters
- Global Presence
- Publication
- STÖBER Homepage
- STÖBER Product Range
Comfort Reference Value – 5th Generation of STÖBER Inverters
STÖBER
ANTRIEBSTECHNIK
11. Used Parameters
KSW-71
A.. Inverter
Par. Description Fieldbus-
address
A10.0
Global
r=0, w=0
Userlevel: Specifies the access level of the user for the parameters via the "Display"
communication path. Each parameter has one level for read or write accesses. A parameter can
only be read or changed with the necessary access level.
The higher the set level the more parameters can be accessed.
Possible settings:
0: Monitor; The elementary indicators can be monitored. General parameters can be changed.
1: Standard; The primary parameters of the selected application can be monitored and changed.
2: Extended; All parameters for commissioning and optimization of the selected application can be
monitored and changed.
3: Service; Service parameters. Permit a comprehensive diagnosis.
Value range: -32768 ... 1 ... 32767
Fieldbus: 1LSB=1; Type: I16; USS-Adr: 01 02 80 00 hex
200Ah
Array
0h
A10.1
Global
r=0, w=0
Userlevel: Specifies the access level of the user for the parameters via the RS232 (X3)
communication path. Each parameter has one level each for read or write accesses. A parameter
can only be read or changed with the necessary access level.
The higher the set level the more parameters can be accessed.
Possible settings:
0: Monitor; The elementary indicators can be monitored. General parameters can be changed.
1: Standard; The primary parameters of the selected application can be monitored and changed.
2: Extended; All parameters for commissioning and optimization of the selected application can be
monitored and changed.
3: Service; Service parameters. Permit a comprehensive diagnosis.
Value range: -32768 ... 3 ... 32767
Fieldbus: 1LSB=1; Type: I16; USS-Adr: 01 02 80 01 hex
200Ah
Array
1h
A10.2
Global
r=0, w=0
Userlevel: Specifies the access level of the user for the parameters via the CAN-bus (SDO)
communication path. Each parameter has one level each for read or write accesses. A parameter
can only be read or changed with the necessary access level.
The higher the set level the more parameters can be accessed.
Possible settings:
0: Monitor; The elementary indicators can be monitored. General parameters can be changed.
1: Standard; The primary parameters of the selected application can be monitored and changed.
2: Extended; All parameters for commissioning and optimization of the selected application can be
monitored and changed.
3: Service; Service parameters. Permit a comprehensive diagnosis.
Value range: -32768 ... 3 ... 32767
Fieldbus: 1LSB=1; Type: I16; USS-Adr: 01 02 80 02 hex
200Ah
Array
2h
A10.3
Global
r=0, w=0
Userlevel: Specifies the access level of the user for the parameters via the PROFIBUS
communication path with the PKW0 or PKW1 protocol. Each parameter has one level each for read
or write accesses. A parameter can only be read or changed with the necessary access level.
The higher the set level the more parameters can be accessed.
Possible settings:
0: Monitor; The elementary indicators can be monitored. General parameters can be changed.
1: Standard; The primary parameters of the selected application can be monitored and changed.
2: Extended; All parameters for commissioning and optimization of the selected application can be
monitored and changed.
3: Service; Service parameters. Permit a comprehensive diagnosis.
Value range: -32768 ... 3 ... 32767
Fieldbus: 1LSB=1; Type: I16; USS-Adr: 01 02 80 03 hex
200Ah
Array
3h