Specifications
Table Of Contents
- Cover Sheet
- Table of Contents
- Notes on Safety
- Introduction
- Selecting the Type of Reference Value
- Representing the Reference Values in User Units
- Combining the Reference Values
- Available Reference Values
- Additional Functions
- Parameterizing the Speed and Torque Limits
- Additional Functions
- Fieldbus
- Used Parameters
- Global Presence
- Publication
- STÖBER Homepage
- STÖBER Product Range
Comfort Reference Value – 5th Generation of STÖBER Inverters
STÖBER
ANTRIEBSTECHNIK
9. Additional Functions
KSW-60
9 ADDITIONAL FUNCTIONS
Information that you will find in
this chapter …
This chapter gives you information on:
• skipping speed
• brake activation
• range control and display scaling and
• events.
9.1 Skipping Speed
How to parameterize skipping
speeds …
System vibration can be prevented by skipping over speeds in certain sympathetic
vibration areas. A total of 4 skipped speed areas can be defined. Go to page 9.1 of the
Assistant (Figure 9-1) to parameterize the skipping speeds. Proceed as described below:
• Enter a speed in C11.x. The value should be in the middle of the area to be skipped.
• Enter a speed range in C10.x. The area to be skipped is calculated as follows from
this:
Range = (C11.x – C10.x) to (C11.x + C10.x)
Parameters with the same parameter element create one skip (e.g., C10.4 with C11.4).
Figure 9-1 Setting the speed skip