Specifications
Table Of Contents
- Cover Sheet
- Table of Contents
- Notes on Safety
- Introduction
- Selecting the Type of Reference Value
- Representing the Reference Values in User Units
- Combining the Reference Values
- Available Reference Values
- Additional Functions
- Parameterizing the Speed and Torque Limits
- Additional Functions
- Fieldbus
- Used Parameters
- Global Presence
- Publication
- STÖBER Homepage
- STÖBER Product Range
Comfort Reference Value – 5th Generation of STÖBER Inverters
STÖBER
ANTRIEBSTECHNIK
8. Parameterizing the Speed and Torque Limits
KSW-54
Figure 8-1 Setting the absolute torque limits
• On page 8.1.1 set the source for the first torque limit in C130 (Figure 8-2). You have a
choice of either an analog input or fieldbus operation (setting 4:parameter).
• If you selected an analog input additional parameters appear which you can use to
parameterize the interface.
• Adjust the factor torque limit C06.
• Go to page 8.1.2 to parameterize the second torque limit. Proceed as for the first
torque limit.
Figure 8-2 Setting the signal source for torque limit 1