Specifications
Table Of Contents
- Cover Sheet
- Table of Contents
- Notes on Safety
- Introduction
- Selecting the Type of Reference Value
- Representing the Reference Values in User Units
- Combining the Reference Values
- Available Reference Values
- Additional Functions
- Parameterizing the Speed and Torque Limits
- Additional Functions
- Fieldbus
- Used Parameters
- Global Presence
- Publication
- STÖBER Homepage
- STÖBER Product Range
Comfort Reference Value – 5th Generation of STÖBER Inverters
STÖBER
ANTRIEBSTECHNIK
6. Available Reference Values
KSW-40
How to parameterize
the reference value
of the controller …
Parameterization is performed on page 3.6.1 of the Comfort Reference Value Assistant.
Proceed as shown below:
• In D34 select whether you want to supply the PID reference value with an analog
signal, preset reference values, or the motor potentiometer.
Figure 6-18 Setting the source for the PID reference value
• If you selected preset reference value or motor potentiometer set the reference values
as shown in chapters 6.2 and 6.3.
• If you set D34 = 0:Reference value extern go to page 3.6.3 of the Assistant (Figure
6-19).
Figure 6-19 Parameterizing the signal source for the external PID reference value