Specifications

Comfort Reference Value – 5th Generation of STÖBER Inverters STÖBER
ANTRIEBSTECHNIK
11. Used Parameters
KSW-223
G.. Technology
Par. Description Fieldbus-
address
G101
Axis, OFF
r=1, w=1
Source PID controller disable: Disable selection of the source for the PID signal.
When G101=2:parameter the control byte or control word is used as the signal source. This setting
should be used for fieldbus operation. The control word can be set to different parameters for
different applications. The list below indicates the control words for the different applications. The
signal can be directly monitored via G301 on the block input.
Application Parameter Bit
Technology controller G210 3
Comfort reference value D211 5
0: Low;
1: High;
2: parameter;
3: BE1;
4: BE1-inverted;
5: BE2;
6: BE2-inverted;
7: BE3;
8: BE3-inverted;
9: BE4;
10: BE4-inverted;
11: BE5;
12: BE5-inverted;
13: BE6;
14: BE6-inverted;
15: BE7;
16: BE7-inverted;
17: BE8;
18: BE8-inverted;
19: BE9;
20: BE9-inverted;
21: BE10;
22: BE10-inverted;
23: BE11;
24: BE11-inverted;
25: BE12;
26: BE12-inverted;
27: BE13;
28: BE13-inverted;
Fieldbus: 1LSB=1; Type: U8; USS-Adr: 07 19 40 00 hex
2C65h 0h
G102
Axis
r=1, w=1
Source PID controller set: Set selection of the source for the PID controller signal.
When G102=2:parameter the control byte or control word is used as the signal source. This setting
should be used for fieldbus operation. The control word can be set to different parameters for
different applications. The list below indicates the control words for the different applications. The
signal can be directly monitored via G302 on the block input.
Application Parameter Bit
Technology controller G210 4
Comfort reference value D211 6
0: Low;
1: High;
2: parameter;
3: BE1;
4: BE1-inverted;
5: BE2;
6: BE2-inverted;
7: BE3;
8: BE3-inverted;
9: BE4;
10: BE4-inverted;
11: BE5;
12: BE5-inverted;
13: BE6;
14: BE6-inverted;
2C66h 0h