Specifications

Comfort Reference Value – 5th Generation of STÖBER Inverters STÖBER
ANTRIEBSTECHNIK
Table of Contents
TABLE OF CONTENTS
1. Notes on Safety 1
1.1 Hardware 2
1.2 Software 3
2. Introduction KSW-4
3. Selecting the Type of Reference
Value KSW-5
4. Representing the Reference Values
in User Units KSW-8
4.1 User Units with a Speed Reference
Value KSW-8
4.2 User Units for a Torque Reference
Value KSW-10
4.3 Switching between the Speed/Torque
Reference Value KSW-12
4.4 Switching between Master/Slave Drive
in Speed/Speed Mode KSW-13
4.5 Switching between Master/Slave Drive
in Torque/Speed Mode KSW-16
5. Combining the Reference Values KSW-18
5.1 Unchanged Main Reference Value KSW-19
5.2 Main Reference Value + Absolute
Reference Value KSW-19
5.3 Main Reference Value + Percental
Reference Value KSW-20
5.4 Factor Reference Value (Weighting) KSW-21
5.5 Switching the Main Reference Value KSW-22
6. Available Reference Values KSW-24
6.1 Reference Value External, Correction
Reference Value 1 and 2 KSW-24
6.2 Preset Values (Fixed Values) and
Preset Reference Values KSW-26
6.2.1 Preset Reference Values KSW-26
6.2.2 Preset Values KSW-31
6.3 Motor Potentiometer KSW-34
6.4 PID Controller KSW-39
6.5 N-actual KSW-46
7. Additional Functions KSW-47
8. Parameterizing the Speed and
Torque Limits KSW-53
8.1 Torque Limits KSW-53
8.2 Speed Limits KSW-57
9. Additional Functions KSW-60
9.1 Skipping Speed KSW-60
9.2 Brake Activation KSW-62
9.3 Range Control and Display Scaling KSW-63
9.4 Reference Value Enable KSW-67
9.5 Events KSW-68
10. Fieldbus KSW-69
11. Used Parameters KSW-70
11.1 Parameter Legend KSW-70
11.2 Parameter List KSW-70