User Manual
Table Of Contents
- Important Safety Instructions
- Welcome to Hydrasynth Explorer!
- Quick Start Guide
- Overview
- Understanding the Modules
- The Oscillator Group
- The Mixer Module
- The Filters and their Controls
- The Amp Module
- The Envelopes
- The LFOs
- The Effects
- The Voice Module
- The Arpeggiator Section
- Mastering the Macros
- The Mod Matrix
- The CV / Gate Section
- Patch Management
- The System Setup Pages
- Control Combinations
- Scales
- MIDI CC Charts
- Specifications
- Declaration of Conformity
79
[SHIFT] + Button X
These shortcuts are available by holding [SHIFT] and pressing the button.
Button Function
Octave Down Jump to lowest octave (-4)
Octave Up Jump to highest octave (+4)
Arp On Access Arp Edit page
Arp Latch Sustain Hold toggle
Browse Access Browse Favorites page
Home Send All Notes O command to engine, USB, and MIDI; turn o all voices and end all
Envelopes; set all Gates to O
Page Up Jump to top page
Page Down Jump to bottom page
Random (2x) Press [RANDOM] twice. After the second press a random selection of values is pulled
from other patches.
[SHIFT] + Control Knob X
The following value jumps are available by holding [SHIFT] and turning the appropriate Control knob.
Location Control knob Behavior
Arp Tempo Fine-tune by 0.1
Arp Length Jump to the closest special value [1, 2, 4, 8, 16, 32]
Arp Phrase Jump to the closest rst phrase of each group
Browse Patch Jump by 10
Browse Compare Jump by 10
Patch Save Patch # Jump by 10
Voice Pitchbend Jump to the closest special value [0, 2, 4, 5, 7, 12, 24]
Macro Assign Edit Destination Module Jump to the closest rst group of each type
Mod Matrix Source Jump to the closest rst modulator of each group
Mod Matrix Destination Module Jump to the closest rst group of each type
Osc X Wave Jump to the closest rst wave of each group
Osc X Semi Jump to the closest special value
[-36, -24, -12, 0, 12, 24, 36]
Osc X Wavescan Jump to the point of Wave position shown in inverted
color [1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0]
Mutant X Ratio Jump to the closest special value
[0.25, 0.5, 1, 2, 3, 4, 5, 6, 7... 64]
[SHIFT] + Control Button X
Location Control Button Behavior
Home Macro
Depends on settings on System Setup page 2. See Macro
Button Response (p. 59).
Reverb Time Toggle activation of Time Freeze
Envelope Delay, Attack, Hold,
Decay, or Release
Duration of holding the button determines the time value.
LFO Rate, Delay, Fade In Duration of holding the button determines the time value.