specification

CCM5Dspecification
Features:
1.CCM5DDCMotorSpeedRegulatorcontrolsthespeedofaDCmotorbyadjustingPulse-Width-Modulated(PWM).
2.Large0.56inch3-digitLEDdisplaynumbersallowviewingunderthemostadverseconditions.
3.Thedisplayrangeof3-digitLEDdisplayis''000-100''.(Forexample,displayed''066''asthepicture1,itmeansthatthePWMoutputduty
cycleis66%.)
4.Adjustablespeedrangeis0%-100%.SuitablefortheDCmotor(orDCload)within5A,Peakcurrent8A.
5.Incorporateapushkey.Pushclosed,andthenpushopen.
Operatinginstruction:
Beforeyouattemptingtowirethecontroller,makesurepowerisoff.
1.Connectwiresrefertothe''wiringdiagram''.
2.Turnonthepower,andadjustthepotentiometer.
3.TheLEDdisplaydisplaysthePWMoutputdutycycle.
4.Pushthekey,thecontrollerclosed,pushitagain,thecontrolleropen.

Warning:
1.DonotReversepositiveandnegativepowerloads.
2.Thiswilldamagethecontrollertochangemotordecription.
3.Interchangethepositiveandnegativewiresofmotors.
TheApplicationofthismotorspeedcontroller