Unit installation

BMB01 – Installation Guide
1 Installation
Technical Specification Summary
Supply Voltage Range ........................................................................................................................................18 – 40 V DC
Current Consumption (max, all LED’s on)....................................................................................... 70 mA @ 24 V DC supply
Digital Outputs .........................................................................................................12 x active-low open-collector outputs
Open-collector Maximum Rated Current ............................................................................................................ 350 mA
Open-collector Maximum Voltage.............................................................................................................................60 V
Analogue Inputs.............................................. 12 x non-isolated analogue interfaces internally pulled up to 5 V by 4.7 kΩ
Digital Inputs.........................................12 x opto-isolated interfaces with built-in resistor to suit voltages of +12 to +40 V
Data Connection...................................................................................................................................EIA RS485 9600 baud
Temperature Range (Storage and Operating)................................................................................................-5 °C to +50 °C
Humidity Range........................................................................................................................ 0 % to 93 % non-condensing
Dimensions (H x W x D) ..............................................................................................................105 mm x 156 mm x 58 mm
Weight ..........................................................................................................................................................................300 g
Equipment and Tool Requirements
• This BMB01.
• A small flat bladed screwdriver.
• A pair of wire cutters/strippers.
• Suitable DIN rail for mounting (35 mm symmetrical “top-hat” type).
External Cabling Requirements
Signals Cable Description Suggested Type
Data 1 x 2-core twisted, screened Suitably rated foil screened cable
Power 1 x 2-core Suitably rated cable
Analogue inputs Multicore, screened Suitably rated foil screened cable
Digital inputs Multicore Suitably rated cable
Digital outputs Multicore Suitably rated cable

1) Screened cable must be used for the RS485 data connections and analogue input connections.
2) The maximum recommended distance for the RS485 data link is 1 km.
3) Refer to BS7671:2008 (Requirements for Electrical Installations) or other appropriate local
standards for guidelines on maximum potential cable lengths given the actual installation
parameters.
Issue: 02 Complete, Approved
Page 3 of 12