Product manual

EAP01 - Product Manual
2.2 Live Announcements via the Fist Microphone
1. Access the internal front panel by unlocking and opening the
cabinet door with the associated KABA key.
2. Unhook the Fist Microphone from its retaining clip.
The PTT switch is located on the side of the fist-
microphone, and care should be taken whilst
removing the microphone from its mounting clip to
avoid accidentally pressing the PTT switch
prematurely.
!
!
ON
BUSY
3. If the BUSY indicator is illuminated, it indicates that an
announcement is already in progress on the associated zone
(or one or more of the group of zones). It is, however, likely
that the announcement source is of lower priority than the
EAP01, so the operator may override this announcement.
PRESS TO TALK BUTTON
PRESS AND HOLD
4. Initiate the announcement at a suitable time by pressing and
holding the PTT button integral with the Fist Microphone.
LOUDSPEAKER
CHIME SOUNDING
5. If programmed at the Router, the pre-announcement chime
will sound.
Issue: 02 complete, approved
Page 8 of 52