Product manual

EAP01 - Product Manual
1
Fist Microphone with integral PTT button
When the PTT button is pressed it activates the All-Call zone selection, opens the microphone
channel, and triggers the pre-announcement chime (if programmed at the Router), ready for the
paging announcement.
When the PTT button is released, the microphone channel is closed and the routes are
terminated.
2
STATUS Indicator (green)
This flashes if the EAP01 is powered and healthy.
If the indicator is constantly off or on, then there is a fault with the EAP01 electronics, or loss of
power.
3
SYSTEM FAULT Indicators (yellow)
These illuminate constantly on or flashing if any fault is present on the PA/VA system.
Note that this does not indicate that the EAP01 or the system is not operational, but it may
indicate that it may not be fully operational. A fault may be present with a fully operational
system, for example, if an amplifier has failed but has been automatically replaced by a standby
amplifier.
4
BUSY Indicator (green)
This function can be optionally cabled.
When the BUSY indicator is lit it indicates that the zone (or one or more of the group of zones)
addressed by the microphone is already in use by another input. The Emergency
Announcement Microphone can normally still make an announcement as it normally has a high
priority within the system.
5
SPEAK NOW Indicators (green)
When the Press To Talk button is pressed, and the chime (if programmed at the Router) has
finished, the SPEAK NOW indicators illuminate to indicate that the announcement can be
made.
Issue: 02 complete, approved
Page 7 of 52