Product manual

EAP01 - Product Manual
5. Disconnect the EAP01 front panel assembly by unplugging the flying leads from the multi-way
connectors on the electronics assembly, and undoing the cable loop P-clip; see Figure 19.
Figure 19 EAP01 Front Panel/Electronics Assembly
BS VERSION 5 OR LATER
BS VERSION < 5
P-CLIP
7-WAY CONNECTOR
6-WAY CONNECTOR
7-WAY CONNECTOR
6-WAY CONNECTOR
P-CLIP
FLYING LEAD
FLYING LEAD
L
DIP switch on microphone PCB is NOT used.
6. Store the front panel assembly, door and fixing screws safely.
Issue: 02 complete, approved
Page 39 of 52