Product manual

EAP01 - Product Manual
14. Reconnect the front panel assembly as follows, see Figure 5:
a. Plug the flying leads to the multi-way connectors on the electronics assembly.
b. Secure the flying leads to the front panel using the P-clip removed in step 3.b.
15. Fix the front panel assembly back in place using the 8 off M4 Allen screws.
16. Re-fit the door.
Ensure that BOTH plastic bushes are tightly fitted to the door fixing holes in order to
preserve the unit’s IP rating.
!
!
17. Power the unit on from the central equipment rack, or wall-mount Intellevac DAU or ACU.
18. Commission the microphone as described in Section “5 Commissioning the EAP01” (page 25).
19. Close and lock the door using the KABA key.
Issue: 02 complete, approved
Page 18 of 52