Product manual

EAP01 - Product Manual
Figure 3 EAP01 Front Panel/Electronics Assembly
DIP SWITCH
(NOT USED)
14-WAY DUAL CONNECTOR
(NOT USED)
4xLEDs
(NOT USED)
1
3
2
5
4
1
2
3 4
BS VERSION 5 OR LATER BS VERSION < 5
Factory default:
LK1 = Fitted
LK2 = Not Fitted
LK1 LK2
1
Microphone PCB protected by a metal plate.
2
Press to Talk (PTT), Speak Now indicator, and System Fault indicators’ connector.
For connection of the flying lead to the back box DIN rail terminals.
3
Fist Microphone connector.
For connection of the microphone cable.
4
Microphone and power supply connector.
For connection of the flying lead to the back box DIN rail terminals.
5
Box-header and links for programming only. These connector and links are for field firmware
upgrade only, and these links should remain as supplied.
Only on EAP01 Build Standard versions prior to 5. On EAP01 Build Standard version 5 or later
the programming header and links are underneath the protection plate.
Issue: 02 complete, approved
Page 11 of 52