Operating instructions

Built-in installation
ASKO washers can be installed beneath a
cabinet or worktop with a height of 34½" (876
mm) or in a closet. There must be a gap of
about ½" (12 mm) all around the machine,
including between the rear edge of the ma-
chine's top panel and the back wall. The
opening width must be at least 24½" (622
mm). Space must also be available for the
inlet and drain hoses. See the illustration be-
low for measurements and positions. If the
washer is installed in a closet the door shall
be opend while the washer is running.
If the drain outlet is higher than 24"(610 mm),
the connections will need to be recessed.
Customer Care Center34
1-800-898-1879
www.askousa.com
Installation instructions
Downloaded From WashingMachine-Manual.com Manuals