User Manual

32
5
Use a soft damp cloth to clean:
– the area in front of the condenser unit where
water usually accumulates,
– the area behind the water condenser unit
(reach deep into the opening all the way to the
rear wall),
– condenser unit housing,
– all gaskets and sealing areas on the condenser
unit housing and door.
6
Press on the edge of the fi lter and pull it out.
7
Rinse the fi lter under running water; then, dry it.
8
Replace the fi lter.
9
Replace the condenser unit into the housing.
Rotate the condenser unit lever down.
Replace the inside cover and rotate the levers
downwards.
Close the outer cover.