Service manual

Settings
Store program
Available on TD70.3 but not on TD70.2 or TD70.1.
User settings are is described in the machine’s
operating instructions.
TD70.1 - Total reset
To reset the machine to its factory settings:
1. Turn off the main power switch (I/0).
2. Wait at least 5 seconds.
3. Press and hold the Stop button (S11).
4. Switch on the main power switch (I/0).
5. Release the Stop button (S11).
TD70.1 - Activating heating element 2
Heating element 2 can be activated/deactivated as
follows:
1. Turn off the main power switch (I/0).
2. Wait at least 5 seconds.
3. Press and hold the button (S4).
4. Switch on the main power switch (I/0).
5. Press button S7 to activate/deactivate heating
element 2. (L7) and (L24) flash when the
element is deactivated. (L7), (L24) and (L9)
flash when the element is activated.
6. Press the Stop button (S11) to save the
settings.
TD70.2 - Total reset
To reset the machine to its factory settings:
1. Turn off the main power switch (I/0).
2. Wait at least 5 seconds.
3. Press and hold the Stop button (S9).
4. Switch on the main power switch (I/0).
5. Release the Stop button (S9).
TD70.2 - Activating heating element 2
Heating element 2 can be activated/deactivated as
follows:
1. Turn off the main power switch (I/0).
2. Wait at least 5 seconds.
3. Press and hold (S4).
4. Switch on the main power switch (I/0).
5. Turn the program selector (J1) to change
between “Heater 2 On” and “Heater 2
Off ”.
6. Press the Stop button (S8) to save the
settings.
TD70.3 - Total reset
To reset the machine to its factory settings
1. Turn off the main power switch (I/0).
2. Wait at least 5 seconds.
3. Press and hold the Stop button (S3).
4. Switch on the main power switch (I/0).
5. Release the Stop button (S3).
TD70.3 - Activating heating element 2
Heating element 2 can be activated/deactivated as
follows:
1. Turn off the main power switch (I/0).
2. Wait at least 5 seconds.
3. Press and hold the Stop button (S3).
4. Switch on the main power switch (I/0).
5. Release the Stop button (S3)
6. Press the Stop button (S3) 5 times
within 10 seconds.
7 Turn the program selector (J1) to change
between “Heater 2 On” and “Heater 2 Off”.
Press the program selector (S1) to save the
settings.
1. Activating the store program
+
If the machine is on: First turn off the power at the main power switch. Press and hold the
Start button (S2) while turning on the main power with the main power switch, then press
the button (S1) 5 times within 10 seconds. The store program starts after 3 minutes and can
be cancelled with the buttons (J1), (S1), (S2) and (S3). If the store program is activated, it
starts immediately when the main power to the machine is turned on. The machine cannot be
started when the store program is activated.
2. Stopping the store program
+
First turn off the power at the main power switch. Press and hold the Start button (S2) while
turning on the main power with the main power switch. The store program is now stopped.
x 5
Service Manual TD70
38