Service manual

Panel key: S = Push button, J = Knob, L = LED
Service menu TD70.1
Turn/
Push
Display/Indication Comments/instructions
L2 flashes No component tested
L2 and L4 flash The motor runs at normal speed
L2 and L7 flash The motor runs at normal speed. Heating element 1 is switched on
and off by the CU depending on the values registered by thermistors 1
and 2. Max. temp. 70°C.
L2, L7 and L9 flash The motor runs at normal speed. Heating element 2 is switched on
and off by the CU depending on the values registered by thermistors 1
and 2. Max. temp. 70°C.
L2 and L9 flash The condensed water pump starts (condenser machines only)
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
L 0 Drying time extended by 0, default setting
L 5 Drying time extended by 5 min
L 10 Drying time extended by 10 min
L 15 Drying time extended by 15 min
L 20 Drying time extended by 20 min
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the button S7 to return to the beginning of the service menu
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the Start button (S10) to confirm the settings and exit the service menu.
S4
/
J1 S9S1 S10
S7S3 S11DISPLAY
L2 L18 L24 L29L9
L7L4
L3 L8
L31
Opening the service menu
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
+
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Check that the machine is switched off. Otherwise switch off the main power by pressing
the main power switch (S1). Press and hold the Start button (S10) while turning on the main
power with the main power switch (S1).
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the Start button (S10) 5 times within 5 seconds. The service menu is now activated,
which is indicated by L2 flashing. The service menu can be closed by turning off the power with
the main power switch (S1).
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the button S7 to navigate the menu system step by step.
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Turn the program selector (J1) to make selections from the menus.
Confirm the selection and continue to the next menu by pressing the button S7.
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the Start button (S10) to confirm the settings and exit the service menu.
x 5
Paneltype B
Service Manual TD70
33