Service manual

Service menu TD70.1
Turn/
Push
Indication Comments/instructions
L2 flashes No component tested
L2 and L4 flash The motor runs at normal speed
L2 and L7 flash The motor runs at normal speed. Heating element 1 is switched on
and off by the CU depending on the values registered by thermistors 1
and 2. Max. temp. 70°C.
L2, L7 and L9 flash The motor runs at normal speed. Heating element 2 is switched on
and off by the CU depending on the values registered by thermistors 1
and 2. Max. temp. 70°C.
L2 and L9 flash The condensed water pump starts (condenser machines only)
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
L33 flashes Drying time extended by 0, default setting
L34 flashes Drying time extended by 5 min
L35 flashes Drying time extended by 10 min
L36 flashes Drying time extended by 15 min
L37 flashes Drying time extended by 20 min
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the button S7 to return to the beginning of the service menu
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the Start button (S10) to confirm the settings and exit the service menu.
J1S1 S10
S7S4 S11
L2 L24L9
L7L4
L3 L8
T 7 4 3 C B U T T E R F L Y D R Y I N G
Auto Normal Dry
Auto Iron Dry
Auto Extra Dry
Auto Dry
L35
L37 L36
L33
L29
L32
L34
Opening the service menu
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
+
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Check that the machine is switched off. Otherwise switch off the main power by pressing
the main power switch (S1). Press and hold the Start button (S10) while turning on the main
power with the main power switch (S1).
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the Start button (S10) 5 times within 5 seconds. The service menu is now activated,
which is indicated by L2 flashing. The service menu can be closed by turning off the power with
the main power switch (S1).
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the button S7 to navigate the menu system step by step.
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Turn the program selector (J1) to make selections from the menus.
Confirm the selection and continue to the next menu by pressing the button S7.
Auto extratorrt
Auto skåptorrt
Tidsprogram
Auto normaltorrt
Auto stryktorrt
Luftningsprogram
T 7 5 3 C B U T T E R F L Y D R Y I N G
Press the Start button (S10) to confirm the settings and exit the service menu.
x 5
Paneltype A
Panel key: S = Push button, J = Knob, L = LED
Service Manual TD70
32