Service manual

Component description
Components and measurement values
The specified resistance values apply at room temperature (about 20°C/68°F). Values within
±10% are considered normal.
Article no. Component Measurement value Comment
80 839 15 Motor 50 Hz,
220/240 V
Winding resistance:
cable colour red-white 26.5 Ω
cable colour red-blue 53.5 Ω
cable colour white-blue 27.0 Ω
Current: 0.7 A; 140 W; 2850 rpm
80 839 16 Motor 60 Hz,
220/240 V
Winding resistance:
cable colour red-white 26.5 Ω
cable colour red-blue 53.5 Ω
cable colour white-blue 27.0 Ω
Current: 0.7 A; 140 W; 3300
rpm
The motor is a 2-pin motor and is
directly connected to the fan for
internal air and the gearing for driving
the cylinder. On condenser dryers, the
motor also drives the fan for external air.
80 903 13 Capacitor 8 μF 50 Hz
80 903 14 Capacitor 6 μF 60 Hz
80 902 70 Capacitor heat pump 17 μF 50 and 60 Hz
80 821 28 Condensate pump 50 Hz
80 846 48 Condensate pump 60 Hz
80 762 02 EMC-filter with inductor The filter eliminates interference to and
from the machine.
80 833 44 Thermistor 4.8 kΩ (at 25°C) The thermistor controls temperature
regulation. If the thermistor is short-
circuited or detaches from the control
unit, the program is stopped.
80 902 72 Termostat 150 150°C manual reset
The thermostat/overheating cut-out
stops the program if the temperature
becomes too high.
80 902 73 Termostat 135 135°C manual reset
80 902 24 Thermostat 110 110°C automatic
80 761 04 Door switch The front door triggers a door switch
which stops the program when the door
is open. If the door has been opened and
closed during the program the machine
must be restarted using the Start/Stop
button.
Service Manual TD70
10