Operating instructions

6
Press the Start button
Remaining drying time
An estimate of the remaining drying time
will be shown on the display a few minutes after
the drying program starts. 1:35 means that it will
take approximately 1 hour and 35 minutes for the
load to dry. If the Anti crease option has been
selected, the drum will rotate for three seconds
per minute for two hours after the program is
finished.
The actual remaining time may be longer than the
estimated time shown on the display. The
remaining time is then shown as 0:15 until the
load is sufficiently dry. If you selected Time saver
the display will show 0:05 instead.
You can stop the tumble dryer by pressing the
Stop button or by opening the door. In both cases
the program is stopped and starts from the
beginning if restarted.
NOTE!
The program will not be affected if you change
the program selector after the program has
started.
14
Tumble drying