Operating instructions

Built-in machine with cover door
fitted
You can choose whether the door is hung on the
right or the left.
Follow these instructions:
1.
Remove the Toe kick.
2.
Remove the cover door by undoing the four
screws. Support the door while doing this.
Undo the screw holding the door magnet in
place.
Steel door
3.
Remove the two cover washer screws on the
front of the steel door. Remove the cover
washers.
The machine
4.
Remove the cover washers from the hinges
by pushing them sideways. Whether this is to
the right or left depends on how the door is fit-
ted on the machine.
The cover washer for the machine hinges
5.
Undo and move the 4 + 3 screws on the hinges
to the other side.
6.
Replace the cover washers.
7.
Refit the cover door.
33Customer Care Center
1-800-898-1879
www.askousa.com
Reversing the door