Operating instructions

You can choose whether the door is hung on the
right or the left.
Follow these instructions:
1.
Remove the plinth.
2.
Unscrew the 2 screws on the hinges.
3.
Lift the door up and remove it. Support the door
at the same time.
4.
Remove both door pins (top and bottom). Fit
them on the opposite side of the door. Refit
the hinges.
5.
Undo and remove the lock hook (lift up and
pull out) and the cover washer from the door
and the machine. Put the hook and the washer
on the other side.
6.
Move the plastic plugs on the upper and lower
edges of the door. Use a flat-bladed screwdriv-
er to remove the plugs.
7.
Refit the door by loosening the hinge screws
slightly, affixing the door and closing it.
Retighten the hinges. Replace the plinth.
26
Door hanging