Operating instructions

Positioning the tumble dryer
The tumble dryer can be free-standing or in a
stack. Remember that the tumble dryer produces
heat and should therefore not be located in a room
that is too small. If the room is very small, drying
will take longer due to the limited quantity of air.
Caution!
The machine must not be installed behind a
lockable door, a sliding door or a door with hinges
on the opposite side to those of the tumble dryer.
Caution!
The tumble dryer's plinth ventilation must not be
blocked by a rug or the like.
Tip!
To improve ventilation, leave the door to the room
where the tumble dryer is located open.
Caution!
Any electrical installation must be carried out by
qualified professionals.
A. Free-standing
The tumble dryer can be positioned beside the
washing machine.
B. Stack
The tumble dryer can be placed on top of a ASKO
washing machine. In this case you use the stack-
ing attachments (foot cups and anti-tilt devices)
that come with the machine: You will find 2 foot
cups in a bag in the drum and 2 anti-tilt devices
are attached to the bottom left corner at the back
of the machine. Extending plates can be ordered
from your local retailer.
How to assemble the stack:
1.
Undo the anti-tilt device.
2.
Undo the two screws indicated on the back of
the washing machine.
3.
Secure the anti-tilt device using the screws as
shown in the picture.
4.
Attach the plastic cups for fixing the tumble
dryer’s front feet to the washing machine’s top
cover. This is essential, as only when the tum-
ble dryer’s feet are resting in the plastic cups
can you be sure that the dryer is correctly posi-
tioned on the washing machine.
Break off tag A on the cup fitted on the right-
hand side and tag B on the cup fitted on the
left-hand side. Then remove the paper from
the self-adhesive surface under the plastic
cups.
A
B
A
B
22
Installation