Technical data

27
Specifications are subject to change without notice. See installation instructions for additional details.
Planning & Design: Stacked Laundry Pairs
W6021/T721, W6461/T721, W6761/T781 (condenser dryers)
Any ASKO dryer can be mounted on
top of any matching ASKO washer.
Stacking kits are provided with the dryer.
Refer to the ASKO Dryer Use and Care
Guide for stacking instructions.
Every ASKO washer is delivered ready-
fitted with a plug and is intended for
connection to an ASKO dryer, which is
equipped with a matching receptacle.
When an ASKO washer is connected to
the dryer, use 220 V, 30 Amp single-
phase circuit. When the dryer is on a
separate outlet, use 220 V, 20
Amp single-phase circuit. If
the washer is used
separately or with another
dryer, it must be on a
separate 220 V, 20 Amp
single-phase circuit.
When placing a stacked pair
next to a wall or cabinet, be
sure to leave 1/2" (12 mm) of
space between the washer
and the wall or cabinet.
ASKO condenser dryers can
be installed to continuously drain through
a hose attached to the rear of the
machine. To ensure proper drainage,
the drain must not be higher than 40"
above the bottom of the dryer.
See page 25 for condensation drain
requirements.
See page 29 for stacked cabinet or
closet installation dimensions.
WARNING! Never stack a washer
on top of a dryer!
Dimensions
US METRIC
HEIGHT 67"–69" 1702–1753 mm
WIDTH 23-7/16" 595 mm
DEPTH: W6021/T721 24-7/16"* 621 mm
W6761/T781 23-7/16" 595 mm
WEIGHT 270–275 lb 122–125 kg
*Includes 1" for control knob.