Technical data

26
Specifications are subject to change without notice. See installation instructions for additional details.
Planning & Design: Stacked Laundry Pairs
W6021/T711, W6461/T731, W6761/T761 (vented dryers)
Any ASKO dryer can be mounted on
top of any matching ASKO washer.
Stacking kits are provided with the dryer.
Refer to the ASKO Dryer Use and Care
Guide for stacking instructions.
Every ASKO washer is delivered ready-
fitted with a plug and is intended for
connection to an ASKO dryer, which is
equipped with a matching receptacle.
When an ASKO washer is connected to
the dryer, use 220 V, 30 Amp single-
phase circuit. When the dryer
is on a separate outlet, use
220 V, 20 Amp single-phase
circuit. If the washer is used
separately or with another
dryer, it must be on a
separate 220 V, 20 Amp
single-phase circuit.
When placing a stacked set
next to a wall or cabinet, be
sure to leave 1/2" (12 mm) of
space between the washer
and the wall or cabinet.
See page 24 for venting requirements.
See pages 29 for stacked cabinet or
closet dimensions.
WARNING! Never stack a washer on top
of a dryer!
WARNING! To reduce the risk of fire,
vented dryers must be exhausted
OUTDOORS or the equivalent.
Never cover the end of the dryer stub
or vent hose with anything to catch lint,
except for a UL-approved vent basket.
Dimensions
US METRIC
HEIGHT 67"–69" 1702–1753 mm
WIDTH 23-7/16" 595 mm
DEPTH: W6021, W6461 24-7/16" * 621 mm
W6761 23-7/16" 595 mm
WEIGHT 253–258 lb 115–117 kg
*Includes 1" for control knob.