Technical data

22
Planning & Design: Washers
W6021, W6461
Specifications are subject to change without notice. See installation instructions for additional details.
Every ASKO washer is delivered ready-fitted with a plug and is intended for connection
to an ASKO dryer, which is equipped with a matching receptacle. If the washer is used
separately or with another dryer, it must be on a separate 220 V, 20 Amp single-phase
circuit.
Second-floor (above grade) installations must meet all local building codes.
When placing the washer next to a wall or cabinet, be sure to leave 1/2" (12 mm) of
space between the washer and the wall or cabinet.
See pages 26–27 for stacked washer/dryer dimensions.
See pages 28–30 for cutout dimensions for closet and under-cabinet installations.
Unit Dimensions
US METRIC
HEIGHT 33-1/2"–34-1/2" 850–876 mm
WIDTH 23-7/16" 595 mm
DEPTH 24-7/16" * 621 mm
DEPTH W/DOOR OPEN 42-17/32" 1080 mm
WEIGHT 167 lb 73 kg
Technical Data
Supply voltage Single-phase
230 V, 60 Hz
Water Pressure 15-146 psi
Heating element 2000 W
Internal Fuse 15 A
Power cord 220 V, 20 Amp
(attached)
*Includes 1" for control knob.