Operating instructions

20
Customer Care Center
1-800-898-1879
www.askona.com
Installation instructions
the left side. Then remove the paper from the
self-adhesive surface under the plastic cups.
5. Fit the plastic cups so that the "tags" marked
with arrows are against the front edge or side
edge of the cover and press them rmly onto
the cover. Then break o the remaining tabs.
6. Push out the knock-out hole on the back of
the tumble dryer (you don't have to completely
remove the knockout, just fold it up far enough
for the stacking bracket to t inside the slot)
using a hammer and a screwdriver.
7. Push the tumble dryer in under the metal
brackets. At the same time keep the front
edge raised by 7/16" (10mm) to 7/8" (20mm) .
8. Lower the tumble dryer’s front feet into the
plastic cups and adjust the tumble dryer to
ensure it is level.
Adjusting the feet
Screw the feet in or out so that the tumble dryer is
both stable and level.
Built-in
A
B