Operating instructions

15
Customer Care Center
1-800-898-1879
www.askona.com
Troubleshooting
The machine will not start
Check:
• that the door is properly closed.
• that the main power switch is on.
• that any plug is connected.
• that the house fuses or circuit breaker have
not been tripped.
• that the overheating cut-out has not been
triggered.
The machine loses all power
during a program
The overheating cut-o shuts o the tumble
dryer if the temperature is too high, caused by
lint clogging the lint lter, for instance.
• Clean the lint lter.
• Check that the condenser is clean. Clean it
if necessary. See the Care and maintenance
instructions chapter.
• Wait until the machine has cooled, then try
starting it. If it still does not start: Call the
Customer Care Center.
Drying takes too long
• Check that the lint lter is not blocked. See the
Care and maintenance instructions chapter.
• Check that the condenser is not blocked.
See the Care and maintenance instructions
chapter.
• Prolonged drying times may also be due to
the tumble dryer being located in a conned
area or in a room that is too small, causing the
air to become too hot.
• Make sure that the tumble dryer has access
to more cold air, open doors and/or windows,
for example.
Error messages
L1 ashes
The maximum program time has been reached.
Read Drying takes too long in this chapter to nd
out what to do.
Start
L1
L3
L2
Stop