Specifications

ASKO’s dishwashers come with all the connections you need. We’ve eliminated the
need to get into the electrical and mechanical area, which makes installation simple
and quick. If a dishwasher is being installed in an area for the first time, most of the
cabinetwork, plumbing, and electrical has to be done before you move the machine into
place. If you are replacing an old dishwasher, you must check the plumbing connection
and wiring before you install the new dishwasher.
This system has these components which have been approved by regulatory
authorities (CULUS):
8
Pex hose with 3/8" brass fitting.
Already wired with a standard
three-pronged plug.
Front-adjustable rear leg.
Drain hose with multiple size adaptor.
OPTIONAL DISHWASHER ACCESSORIES
European Toe Kick (Two Pieces)
8070121-0 Extension 8057528-0 Toe Kick
White European toe kick to accommodate 6" toe space on
model D3251FI. Two pieces are 23-1/2" wide.
8070121-86 Extension 8057528-29 Toe Kick
Black toe kick for same installation. Two pieces are 23-1/2" wide.
2.5" Toe Kicks
For special installations (D3112, D3251FI).
805SC-W White 805SC-B Black 805SC-M Titanium
Extension
European Toe Kick
EASYINSTALL
™
DISHWASHERS
2.5" Toe Kick
• Over 5' of Pex hose that replaces
the water-inlet copper tubing. It
has a 3/8"-compression fitting
that mates with a 3/8" shut-off
valve. Length: 5'2" from back of
unit.
• Over 6' of drain hose with an
adaptable drain connection. The
high loop is built into this hose on
the back of the unit. Length: 6'6"
from back of unit.
• A 6' long electrical cord with
standard, 3-pronged, 120V plug.
This eliminates the need to wire
anything under the unit.
• Front-adjustable rear leg. You
can raise or lower the rear leg
from the front of the unit simply
by using a flat-head screwdriver
to rotate the adjusting screw.
Back of ASKO dishwasher
with EasyInstall system.