Operating instructions

Page 7
ENGLISH ENGLISH
T760/T780 – CUSTOMIZING THE PRESET PROGRAMST760/T780 – CUSTOMIZING THE PRESET PROGRAMS
Before we tell you how to customize the preset programs,
you need to review what these programs are. The table
below lists the four preset programs and the pre-
THE PRESET PROGRAMS THE PRESET PROGRAMS
P1 P2 P3 P4
ASKO’s EasyControl™ panel makes it simple to
customize the preset programs to perfectly fit your
laundry needs. You needn’t worry about making an error
because you can easily restore the original program
settings. (See page 9.)
1. Press the button for the preset program
you want to change (P1–P4). The program
you select will display in the lower left
corner of the LED window.
2. Press MENU to display different program
and option settings.
3. Press the Arrows to move forward or
backward through the menu settings.
4. Press ENTER to choose your selection.
The following table lists all of the programs on the
Program menu as well as the settings and options
available with each. It’s a good idea to scan through the
THE PROGRAM MENUTHE PROGRAM MENU
menus a couple of times and familiarize yourself with
the options before you make any changes. And
remember, it’s easy to restore the preset programs.
CUSTOMIZING THE PROGRAMSCUSTOMIZING THE PROGRAMS
Below are the basic instructions for changing a preset program. The following page explains the menus and options
and how to navigate through them.
programmed settings for each. To select a program, simply
press one of the program buttons then press Start.
(1) The Normal cooling time is 20 minutes.
(2) Model T760 is preset for Low dry temperature.
NOTES:
WARNING!
Some fabrics may not be able to withstand extremely hot temperatures. Please refer
to the “Recommended Temperature Settings and Load Sizes” chart on page 4.
Preset Dry Cooling Anti-
Program Dry Cycle Temp Time Buzzer Crease
P1 Extra Dry Normal Normal
(1)
On 1 hr.
P2 Dry Normal Normal On 1 hr.
P3 Normal Dry Normal Normal On 1 hr.
P4 Iron Dry Normal
(2)
Normal On 1 hr.
ProgramsPrograms Available OptionsAvailable Options
Extra Dry Normal Cooling (20 min.) or Quick Cooling (10 min.); Buzzer On/Off;
0–3 hr. Anti-crease; Normal or Low Temperature, 1–12 hr. Delay Start
Dry Normal Cooling (20 min.) or Quick Cooling (10 min.); Buzzer On/Off;
0–3 hr. Anti-crease; Normal or Low Temperature, 1–12 hr. Delay Start
Normal Dry Normal Cooling (20 min.) or Quick Cooling (10 min.); Buzzer On/Off;
0–3 hr. Anti-crease; Normal or Low Temperature, 1–12 hr. Delay Start
Iron Dry Normal Cooling (20 min.) or Quick Cooling (10 min.); Buzzer On/Off;
0–3 hr. Anti-crease; Normal or Low Temperature, 1–12 hr. Delay Start
Air Fluff 5–90 min. cycle time; Buzzer On/Off; 0–3 hr. Anti-crease, 1–12 hr. Delay Start
Timed Dry All drying programs; 5–90 min. cycle time; Normal Cooling (20 min.) or
Quick Cooling (10 min.); Buzzer On/Off; 0–3 hr. Anti-crease; Normal or
Low Temperature; 1–12 hr. Delay Start
Start Stop
P1 P2 P3 P4
Menu Enter